|Foot & Leg Consults| Custom Orthotics | Video Gait Analysis

 

 

The Process
Instructions

 

Custom Orthotics

Orthotics are custom made shoe inserts individually designed to control the alignment and motion of the feet and legs during gait.

Bio-Mechanical Advantage draws from its expertise in pedorthic and podiatric orthotic techniques to offer devices which meet the specific requirements of each patient.  

With our in-house orthotic manufacturing facility and access to a wide range of thermoplastic and multi-density foam materials, we are able to make the most appropriate device for the individual.

The three main categories of foot orthotics are described below:

Semi-Rigid Orthotics

Made from a wide assortment of thermoplastic materials, semi-rigid orthotics are generally used when maximum foot control is desired.  Because these devices are not as bulky as those in the other categories, they are also used when shoe fit is a factor.  The wide range of material properties allows the pedorthist to vary the rigidity and control level of these devices to meet the individual needs of the patient's feet.  

Firm Orthotics

Firm orthotics provide a blend of support and cushioning.   Through the lamination of various low, medium, and high density foam materials, this type of orthotic provides moderate control and some cushioning.  Firm devices tend to be bulkier than semi-rigid orthotics, making them more difficult to fit into some footwear.

Soft Orthotics

When bony prominences in the foot cause pressure points, maximum cushioning and/or accommodation of soft orthotics is required.  These devices provide minimal support and, because of their bulk, generally require the use of extra depth footwear.

 

 

 

 

  

| Home | About Us | What's New | Appointments | Services | Site Map | Contact Us

 

 

 

 

 

Copyright (c) 2007 Biomechanical Advantage

All Rights Reserved